25
Therefore before storing a program it is a good idea to make sure that the
internal or cartridge destination program number you have in mind is in fact
undesired. To help avoid accidentally erasing valuable programs, the Prophet
VS has separate Review and Store functions.
Review
Use this function before storing a new or edited program.
Review assists you in nding a destination for your edited program by allow-
ing you to temporarily save the current edited program so that you can com-
pare it to other programs.
1. To begin with, you have an edited program, and the Store and Edit Waveform
switches are o.
2. Switch Review on, as indicated by its LED.
This "freezes" the current edits and holds them in a temporary RAM location.
When Review is on, this means that an edited program is being held in
temporary storage. In other words, when you switch Review o, your edited
program is still there.
3. To review programs, enter the desired two digits.
The Program display shows the number of the program being reviewed. This
program is heard instead of the edited program.
It is true that you cannot record over cartridge ROM programs but you are
allowed to review them for comparison purposes.
4. To hear the edited program again, switch Review o.
Your edited program returns. Note that for convenience the Program display
retains the number of the last program reviewed.
5. If desired, store the edited program at a suitable program number. (See below.)
Store
To store an edited program:
1. Decide the destination. (Use Review, see above.)
2. If the destination is internal, switch Cartridge o.
3. If the destination is external, switch Cartridge on and insert a RAM cartridge.
4. Make sure that the cartridge Store switch is set to En.
5. Review and Edit Waveform must be o.
HOME
To Next Page
Loading...
