96
This keeps going until all of the data has been transmitted. Of course, the
sample length will probably not be an even multiple of 120 bytes. In the case
of the last packet, the unused portion is to be ignored by the slave and may
even be lled out with garbage by the master (the VS uses zeros). This is to
keep the packets all the same size, which is easier to program.
After the nal handshake, the master transmits an F7, and both master and
slave return to normal operation.
Note: The above is a general description of how the common sample dump
standard operates. Since the Prophet VS is not a sampler, and only deals with
small amounts of wave data, “Acknowledge” and “Not Acknowledge” are not
implemented.
HOME
To Next Page
Loading...
