11
Technical data
Brake control
Operating Instructions – MOVIPRO
®
PHC11A-..M1-..2A-A1/..
100
11.3 Brake control
Function module PFA-..S23-.. PFA-..S40-.. PFA-..S46-..
Terminal designation X2011
Brake voltage DC 96 V DC 167 V DC 190 V
SEW brake type AC 230 V AC 400 V AC 460 V
Nominal brake current
Terminals 13, 15
DC 1.2 A DC 0.7 A DC 0.6 A
Brake acceleration current
Terminals 13, 14
4 – 8.5 times the holding current depending on the brake type
Maximum braking power 120 W
11.4 DC 24 V output
Function module PFE-..0302.. PFE-..0702.. PFE-..0701..
Terminal designation X2311 X2311 X2551
Nominal output voltage DC 24 V −15% / +20%
Complies with PELV according to DIN EN 61131
Nominal output current DC 3.5 A DC 7.0 A 2 × DC 3.5 A
Maximum load capacity 2200 µF
20278543/EN – 09/2014
To Next Page
Loading...
