SEW-Eurodrive MOVIPRO PHC11A-M1-2A-A1 Series - Representation of Connections; Designation Key

7
Electrical connections
Representation of connections
Operating Instructions – MOVIPRO
®
PHC11A-..M1-..2A-A1/..
53
• Brake control
• Communication package
You can find more information on the function modules in chapter "Function modules
nameplate" (→ 2 18).
7.2 Representation of connections
The following wiring diagrams show the contact end of the connections.
7.3 Designation key
The designations of the connections are based on the following structure: Xabbc_mn.
The individual positions represent the following information:
X Terminal
a Group
1 = Power input
2 = Power output
3 = Encoder
4 = Bus
5 = Inputs and outputs
bb Function
Function of the connection within a group
c Type
Wiring diagram of the connection within a function
_
m Group number (optional)
Groups connections with the same signal
n Sequence number (optional)
For several connections in one group
20278543/EN – 09/2014