SEW-Eurodrive MOVIPRO PHC11A-M1-2A-A1 Series - X2301: Braking Resistor

7
Electrical connections
X2301: Braking resistor
Operating Instructions – MOVIPRO
®
PHC11A-..M1-..2A-A1/..
64
7.11 X2301: Braking resistor
The following table shows information about this connection:
Function
Power connection for external braking resistor
Connection type
Han
®
Q 5/0, female
Wiring diagram
PE
1
2
4
3
5
Assignment
No. Name Function
1 n.c. Not connected
2 n.c. Not connected
3 +R Braking resistor (+)
4 n.c. Not connected
5 -R Braking resistor (–)
PE PE PE connection
7.11.1 Connection cables
INFORMATION
For the braking resistor BW100-004-00, you do not have to order an additional ca-
ble! The brake resistor is delivered with mounted connection cable and plug connec-
tor.
The following table shows the cables available for this connection:
Cable Length/
Installation
type
Component
Part number: 11722916
Cable design: (3G2.5)
Cable cross section: 2.5 mm
2
Han
®
Q 5/0 ↔ open with conductor end sleeves
Variable
length
External braking resistor
Terminal cross section
6 mm
2
20278543/EN – 09/2014