1
General information
About this documentation
Operating Instructions – MOVIPRO
®
PHC11A-..M1-..2A-A1/..
6
1 General information
1.1 About this documentation
This documentation is an integral part of the product. The documentation is intended
for all employees who perform assembly, installation, startup, and service work on the
product.
Make sure this documentation is accessible and legible. Ensure that persons respon-
sible for the system and its operation, as well as persons who work independently on
the unit, have read through the entire documentation and understood it. If you are un-
clear about any of the information in this documentation, or if you require further infor-
mation, contact SEW-EURODRIVE.
1.2 Structure of the safety notes
1.2.1 Meaning of signal words
The following table shows the grading and meaning of the signal words for safety
notes.
Signal word Meaning Consequences if disregarded
DANGER Imminent hazard Severe or fatal injuries.
WARNING Possible dangerous situation Severe or fatal injuries
CAUTION Possible dangerous situation Minor injuries
NOTICE Possible damage to property Damage to the drive system or
its environment.
INFORMATION Useful information or tip: Sim-
plifies handling of the drive sys-
tem.
1.2.2 Structure of section-related safety notes
Section-related safety notes do not apply to a specific action but to several actions
pertaining to one subject. The hazard symbols used either indicate a general hazard
or a specific hazard.
Section-related safety notes are structured as follows:
SIGNAL WORD
Type and source of hazard.
Possible consequence(s) if disregarded.
• Measure(s) to prevent hazard.
Meaning of the hazard symbols
The hazard symbols in the safety notes have the following meaning:
Hazard symbol Meaning
General hazard
20278543/EN – 09/2014
To Next Page
Loading...
