SEW-Eurodrive MOVIPRO PHC11A-M1-2A-A1 Series - Device Configuration

8
Startup
Device configuration
Operating Instructions – MOVIPRO
®
PHC11A-..M1-..2A-A1/..
86
8.4 Device configuration
8.4.1 Settings
During startup, the different components of the unit are configured, parameterized
and/or installed:
• Configuration of the radio modem settings
• Configuration of the processing unit
• Parameterization of the frequency inverter
Use the X4223 (Ethernet service interface of the communication and control unit) to
establish the connection to the processing unit of the unit.
In the delivery state, the communication and control unit uses the DHCP communica-
tion protocol.
8.4.2 Configuration software
Use the latest version of the following software to make all the required settings:
• MOVITOOLS
®
MotionStudio
• FTP Software
• MOVIVISION
®
parameter and diagnostics tool
20278543/EN – 09/2014