PHC11A-..M1-..2A-A1/..
a) Authorized representative for issuing this declaration on behalf of the manufacturer
b) Authorized representative for compiling the technical documents with an address identical to that of the manufacturer
900330014
26.09.2014
SEW EURODRIVE GmbH & Co KG
Ernst-Blickle-Straße 42, D-76646 Bruchsal
declares under sole responsibility that the following products
Drive systems of the series PHC11A-..M1-..2A-A1/.. (18255493)
(18258670)
(18255655)
(18256090)
(18255663)
(18258468)
according to
Machinery Directive 2006/42/EC
This includes the fulfillment of the protection targets for "electrical power supply" in accordance
with annex I No. 1.5.1 according to the Low Voltage Directive 73/23/EEC and 2006/95/EC.
EMC Directive 2004/108/EC 4)
Radio and telecommunications
Terminal Equipment Directive
1999/5/EC
9)
Applied non-harmonized standards: EN ISO 13849-1:2008
EN 61800-5-1:2007
EN 61800-3:2004 + A1:2012
EN 60950-1:2006
EN 62311:2008
4) According to the EMC directive, the products listed cannot be operated independently.
Only if these products are integrated in a overall system can they be evaluated with reference
to EMC guidelines. The evaluation only accounts for a typical system configuration and not
for the individual product.
9) To the extent that the products are covered by this directive in the country of operation.
To Next Page
Loading...
