8
Startup
Prerequisites
Operating Instructions – MOVIPRO
®
PHC11A-..M1-..2A-A1/..
85
NOTICE
Danger due to arcing.
Damage to electrical components.
• Do not plug or unplug the power connectors during operation.
INFORMATION
To ensure fault-free operation, do not disconnect or connect signal lines during oper-
ation.
8.2 Prerequisites
The following conditions apply to the startup:
• The unit must be installed correctly both mechanically and electrically.
• The system and connected drives must be configured correctly.
• Appropriate safety measures are taken to prevent the drives from starting up unin-
tentionally.
• Appropriate safety measures must be taken to prevent risk of injury or damage to
the machine.
The following hardware is required for startup:
• PC or laptop with Ethernet interface
8.3 Hoist applications
WARNING
Danger of fatal injury if the hoist falls.
Severe or fatal injuries.
• The unit is not designed for use as a safety device in lifting applications. Use
monitoring systems or mechanical protection devices to ensure safety.
20278543/EN – 09/2014
To Next Page
Loading...
