SEW-Eurodrive MOVIPRO PHC11A-M1-2A-A1 Series

To Next Page

To Previous Page

Unit structure

Function modules

Operating Instructions – MOVIPRO

PHC11A-..M1-..2A-A1/..

3.7 Function modules

3.7.1 Internal axis PFA..

The function module consists of the following internal elements.

Drive inverter with MOVIDRIVE

platform

The frequency inverter on a MOVIDRIVE

basis is use to control asynchronous mo-

tors.

For detailed information about motor assignment and system properties, refer to the

"MOVIDRIVE

MDX60B/61B" system manual.

Brake control

The brake control system is responsible for the power supply and control of the SEW

disk brakes of the connected motors.

Motor types

The unit supports the following SEW motor types:

• DRE..

• DRS..

• DRP..

• CM..

S1 operating switch

NOTICE

Damage caused by actuating the operating switch while it is energized.

Increased wear on the contacts.

• Always actuate the operating switch in a de-energized state.

20278543/EN – 09/2014

SEW-Eurodrive MOVIPRO PHC11A-M1-2A-A1 Series - Function Modules