SEW-Eurodrive MOVIPRO PHC11A-M1-2A-A1 Series - Connection Cables; Cable Structure

7
Electrical connections
Connection cables
Operating Instructions – MOVIPRO
®
PHC11A-..M1-..2A-A1/..
54
7.4 Connection cables
Connection cables are not included in the delivery.
Prefabricated cables for connection between SEW components can be ordered from
SEW-EURODRIVE. For each connection, the available prefabricated cables are listed.
Specify the part number and length of the required cable in your order.
The number and design of the required connection cables depend on the unit variant
and the components to be connected. This is why you do not need all listed cables.
Cable types:
The table below shows the depiction and what they mean:
Depiction Meaning
Fixed length
Variable length
Suitable for cable carriers
Not suitable for cable carriers
INFORMATION
For more detailed information, refer to the "Technical data" chapter.
7.5 Cable structure
7.5.1 Designation
The cable designation is specified as follows. The example is a cable with a
(4X2X0.25) design:
( Cable shield
4 Number of core pairs (in twisted cables only)
X
2 Number of cores
X G - with green-yellow PE conductor
X - without PE conductor
0.25 Core cross section in mm
2
) Cable shield
+ A plus sign is added to cores with other features.
…
20278543/EN – 09/2014