4
Integrated safety technology
Standards
Operating Instructions – MOVIPRO
®
PHC11A-..M1-..2A-A1/..
29
4 Integrated safety technology
WARNING
Failure of the safety components because of incorrect startup.
Severe or fatal injuries.
• Only use the unit in combination with functional safety technology when you have
the “MOVIPRO
®
– Functional Safety” manual at hand and you ensure compli-
ance with the requirements for operation with functional safety.
4.1 Standards
The safety technology of the unit described below has been developed and tested in
accordance with the following safety requirements:
• DIN EN 1037: 2008
• EN ISO 13849-1: 2008
• EN ISO 13849-2: 2008
4.2 Safety functions
You can use the following drive-related safety functions:
• STO (Safe Torque Off) according to EN 61800-5-2: 2007
• SS1(c) (Safe Stop 1), function variant c according to EN 61800-5-2: 2007
• SBC (Safe Brake Control) according to EN 61800-5-2: 2007
4.3 Safety concept
The following safety concepts can be realized with this unit:
• Axis module with safe torque off
• Safety-related brake module
4.4 Additional information
For detailed information, refer to the "MOVIPRO
®
– Functional Safety" manual.
20278543/EN – 09/2014
To Next Page
Loading...
