SEW-Eurodrive MOVIPRO PHC11A-M1-2A-A1 Series - Page 19

3
Unit structure
Identification
Operating Instructions – MOVIPRO
®
PHC11A-..M1-..2A-A1/..
19
Power section
P MOVIPRO
®
product range
F Internal function
A Internal axis
-
MD Frequency inverter on MOVIDRIVE
®
basis
.. Frequency inverter power rating:
022 = 2.2 kW
040 = 4.0 kW
B Generation B
-
G Encoder evaluation
0 Motor encoder type:
0 = Without motor encoder
0 Distance encoder type:
0 = Without distance encoder
-
B Brake control
.. Brake control type:
S23 = Safety-related brake module (230 V)
S40 = Safety-related brake module (400 V)
S46 = Safety-related brake module (460 V)
-
.. Axis interfaces:
10 = 1 motor connection + STO
30 = 1 motor connection + STO + 1 digital output
/
.. Option 1:
C01 = Without fan subassembly
C11 = Smaller heat sink without fan
/
.. Option 2:
000 = Motor connections dependent on the power rating (BG0 = HANQ8, BG1 = HAN6B,
BG2 = HAN10B)
010 = Motor connections dependent on the power rating (HANQ8)
INFORMATION
Option 1 design: C11 is the nominal output power in S1 operation, thermally reduced
to the value specified in the technical data.
20278543/EN – 09/2014