Connecting to External Equipment
Using Digital Audio Output . .
It
is
possible to output audio through the DIGITAL AUDIO OUTPUT terminal.
(See
page 30 for details.) PCM audio
outputs from the terminal.
To optical digital input
of
external audio devices
D1Sg,~
Optical fiber cable
INPUT
~
9Of-
.....;(c_o_m_m_e_rc_ia_lI.;.y_a_va_i_la_b_le.;..)
__
crm
• Depending on the connected equipment, audio will not output from the DIGITAL AUDIO OUTPUT terminal
in
HOMI
connection.
In
this case, set the audio formats
of
the connected equipment to PCM,
32/44.1/48
kHz.
Connecting
HDMI
Equipment
You can use the INPUT
5,
INPUT
6,
INPUT
7,
INPUT 8
or
INPUT 9 terminal when connecting HDMI equipment.
~
HDMI-certified cable
~
(_co_m_m_e_rc_ia_I_IY_a_V_ai_la_b_le_)
_
HOM
I
equipment
crm
• When using an HDMI-DVI conversion cable, input the audio signal
to
the AUDIO terminal of INPUT
6.
When you input the audio signal via the AUDIO terminal with INPUT
6,
set "PC Audio Select" to "Input 6
(HDMI)".
(See
page 28.)
• To enjoy the
AQUaS
1
080p
display capability, connect your Blu-ray disc player or other external equipment using an HDMI-
certified cable and set the equipment
to
1
080p
output.
Connecting a PC
When connecting
to
a PC with an analog RGB terminal (INPUT
4):
o 3.5
mm
stereo minijack cable
(commercially available)
@~=---------------e:~-+
RGB cable
(commercially available)
PC
When connecting to a PC with an
HOMI
terminal (INPUT 5,
6,7,8
or
9):
HOMI-certified cable
(commercially available)
PC
I
Hill
,j-
:::::I----t
crm
• When connecting a PC
to
the INPUT
4,
set "PC Audio Select"
to
"Input 4 (PC)". (See page 28.)
• When connecting a PC
to
the INPUT
6,
set "PC Audio Select" to "Input 6 (HDMI)". (See page 28.)
• The HDMI terminals only support digital signal.
• Refer
to
page 42 for a list of PC signals compatible with the
TV.
@-
13
To Next Page
Loading...
