ICTRL
al
Control
Setting)
On-ScrE~en
Display
Menu
mmmm
For adjusting a picture's horizontal and vertical
position.
H-Pos.:
Centers the image by moving
it
to the left or
right.
V-Pos,,: Centers the image by moving
it
up or down.
1m
• For resetting adjustments to the factory preset values,
press
..
/T
to select "Reset", and then press ENTER.
• When connecting a
PC
to the HDMI terminal, the image
position will be automatically adjusted.
It
cannot be
manually adjusted.
• The screen position variable ranges depend on the View
Mode or the signal type. The ranges can be seen on the
position-setting screen.
•
Adjustm(~nts
are stored separately according to input
source.
Reset
i
If
complex adjustments are made and the settings
cannot be restored to normal, you can reset the
settings to the factory preset values.
1 "Return to the factory preset values" displays on the
screen.
• If
yOLi
have already set the Secret No., input the 4-digit
secret number here.
2 Select "Yes".
• "Now, TV will restart automatically. OK?" displays on the
screen.
3 Select "Yes".
• "Now initializing
...
" displays on the screen and blinks.
After the reset has been completed, the power shuts off
and then comes back on. The screen will have returned
to its original settings.
1m
• The Channel Setup settings will not be changed.
• The Language settings will not be changed.
• The Secret number settings will not be changed.
• The TV L.ocation settings will not be changed.
III
-
Allows you to use a secret number to protect certain
settings from being accidentally changed.
IMPORTANT:
Three conditions must be met to enable the V-Chip
(see
pages 25 to 27):
1. Secret No.
is
registered.
2. V-ChipN-Chip
(DTV
Only) settings have been made.
• The "V-Chip
(DTV
Only)" will only be selectable when
a new rating system can be downloaded via digital
broadcasting
in
the U.S.
3. "Status"
is
set
to
"On".
•
New
Secret
No.
You can set and change the secret number by using
0-9.
Input
Secret
No.: When you change the secret number,
enter the old 4-digit secret number here. The cursor
moves to "New Secret No.".
New
Secret
No.: When you set the new secret number,
enter the new 4-digit secret number here. The cursor
moves to "Reconfirm".
Reconfirm:
Enter the same 4-digit number you set
in
"New Secret No.".
•
Secret
No.
Clear
You can clear your secret number.
Yes: Your secret number
is
cleared.
No:
Your secret number
is
not cleared.
• As a precautionary measure, make a note of your secret
number and keep
it
in
a familiar place.
• If the secret number
is
cleared, the Status setting
automatically sets
to
"Off". "V-Chip" and "Status" will not be
selectable from the menu.
Used
to
enable or disable the parental control function.
This function will not be selectable from the menu if
you
do
not first configure your secret number.
On: Enables Parental CTRL.
Off:
Disables Parental CTRL.
V-CHIP
is
an
electronic filtering device built into your
TV.
This tool gives parents a great degree of control
over broadcasts accessed by their children.
It
allows
parents to select programs judged suitable for child
viewing while blocking ones judged not suitable.
It
does so automatically once you activate the V-CHIP
feature
in
your
TV.
"V-Chip" and "Status" will not be
selectable from the menu if you
do
not first configure
your secret number.
• The U.S. has
two
rating systems for viewing content: TV
Parental Guidelines and movie ratings.
• The TV Parental Guidelines work
in
conjunction with the
V-CHIP
to
help parents screen out inappropriate television
shows from their children.
• Movie ratings are used for original movies rated by the
Motion Picture Association
of
America (MPAA) as watched
on cable TV and not edited for television. The V-CHIP can
also be set to block MPAA-rated movies.
1m
• The setting automatically enters "Block" for any ratings
below your selection.
•
If
Status
is
not set
to
"On", the configuration settings will
not work.
®-
25
To Next Page
Loading...
