Appendix
Troubleshooting
Problem
Possible Solution
• No power
• Check
if
you pressed TV POWER on the remote control unit.
(See
page 14.)
If
the
indicator on the TV does not light up, press
POWER on the
TV.
•
Is
the AC cord disconnected?
(See
page
7.)
• Has the power been turned on?
(See
page 14.)
• Unit cannot be operated.
• External influences such
as
lightning, static electricity, may cause improper operation.
In
this case, operate the unit after first turning off the power of the
TV
or unplugging
the AC cord and replugging
it
in
after 1 or 2 minutes.
• Remote control unit does not
•
Is
the
FUNCTION
set correctly? Set
it
to the TV setting position.
operate.
• Are batteries inserted with polarity (
+,
-)
aligned?
(See
page
8.)
• Are batteries worn out? (Replace with new batteries.)
• Are you using
it
under strong or fluorescent lighting?
•
Is
a fluorescent light illuminated near the remote control sensor?
• Picture
is
cut off/with sidebar
•
Is
the image position correct?
(See
page 25.)
screen.
• Are screen mode adjustments such
as
picture size made correctly?
(See
page 18.)
• Strange color, light color, or color
• Adjust the picture tone.
(See
pages
21
and 22.)
misalignment
•
Is
the room too bright? The picture may look dark
in
a room that
is
too bright.
• Power
is
suddenly turned off.
•
Is
the sleep timer set?
(See
page 15.)
• Check the power control settings.
(See
page 23.)
• The unit's internal temperature has increased. Remove any objects blocking vent or
clean.
• No picture
•
Is
connection to other components correct?
(See
pages 12 and 13.)
•
Is
correct input signal source selected after connection?
(See
page 28.)
•
Is
the correct input selected?
(See
page 28.)
•
Is
picture adjustment correct?
(See
pages
21
and 22.)
•
Is
"On" selected
in
"Audio Only"?
(See
page 28.)
•
Is
a non-compatible signal being input?
(See
page
42)
• No sound
•
Is
the volume too low?
(See
page 15.)
•
Is
"Variable" selected
in
"Output Select"?
(See
page 29.)
• Have you pressed
MUTE
on the remote control unit?
(See
page 15.)
• The
TV
sometimes makes a
• This
is
not a malfunction. This happens when the cabinet slightly expands and
cracking sound. contracts according to change
in
temperature. This does not affect the TV's
performance.
Troubleshooting-Digital Broadcasting
The
error
message
about
reception
of
broadcast
The
example of an
error
message
Error
code
Possible Solution
displayed on a screen
• Failed to receive broadcast.
E202
• Check the antenna cable. Check that the antenna
is
correctly
setup.
• No broadcast now.
E203
• Check the broadcast time
in
the program guide.
Cautions regarding use
in
high and low temperature environments
• When the unit
is
used
in
a low temperature space
(e,g.
room, office), the picture may leave trails or appear slightly delayed.
This
is
not a malfunction, and the unit will recover when the temperature returns to normal.
•
Do
not leave the unit
in
a hot or cold location. Also, do not leave the unit
in
a location exposed to direct sunlight or near a
heater, as this may cause the cabinet to deform and the Liquid Crystal panel to malfunction.
Storage temperature: - 4
OF
to + 140°F (- 20°C to +60°C)
@-
39
To Next Page
Loading...
