: Feb. 6 2004
1
AR-M550/M620/M700 DETAILS OF EACH SECTION 6 - 85
a. Transfer unit
1) Open the left door unit.
2) Loosen the blue screw and open the holder to remove the transfer
unit.
a-1. Transfer drive gear
1) Remove the transfer unit. (See “a. Transfer unit” in this section)
2) Loosen the blue screw and unhook the hook lever in order to open
the transfer belt unit in the arrowed direction.
3) Remove the spring.
4) Remove the transfer belt unit in the arrowed direction.
5) Remove the transfer belt unit. (See “a-1. Transfer drive gear” in
this section)
6) Remove the ground members.
7) Remove the blue screw to remove the roller fixing members.
8) Pull out the upper transfer roller unit from the transfer belt.
9) Remove the E-ring and screw to remove the transfer drum gear.
1
2
1
To Next Page
Loading...
