Sharp AR-M550U - Page 272

: Feb. 9 2004
1
AR-M550/M620/M700 SIMULATION 8 - 14
46 2 Used to adjust the copy density in all
the copy modes (Auto, Text, Text/
Photo, and Photo mode).
Adjustment Picture
quality
Density
9 Used to adjust the print density for
each density level (display value) in
the copy mode (binary - Text mode).
An optional print density can be set
for each density level (display value).
Adjustment Picture
quality
Density
10 Used to adjust the print density for
each density level (display value) in
the copy mode (binary - Text/Photo
mode). An optional print density can
be set for each density level (display
value).
Adjustment Picture
quality
11 Used to adjust the print density for
each density level (display value) in
the copy mode (binary - Photo
mode). An optional print density can
be set for each density level (display
value).
Adjustment Picture
quality
Density
12 Used to adjust the print density in the
FAX mode (all modes).
Adjustment Picture
quality
13 Used to adjust the print density in the
FAX mode (each normal mode).
(Only when FAX is installed.)
Adjustment Picture
quality
14 Used to adjust the print density in the
FAX mode (each fine mode). (Only
when FAX is installed.)
Adjustment Picture
quality
15 Used to adjust the print density in the
FAX mode (each super fine mode).
(Only when FAX is installed.)
Adjustment Picture
quality
16 Used to adjust the print density in the
FAX mode (each ultra fine mode).
(Only when FAX is installed.)
Adjustment Picture
quality
17 Used to set the gain in shading
correction.
Setting Optical (Image
scanning)
CCD, CIS Operation
18
Used to adjust the gamma (density
gradient) in the copy mode.
Adjustment Picture
quality
Density
19 Used to set the auto mode operation
specifications in each mode (copy,
scan, FAX).
Adjustment Picture
quality
Density
20 Used to adjust the copy density
correction in the SPF copy mode for
the document table copy mode. The
adjustment is made so that the copy
density becomes the same as that of
the document table copy mode.
Adjustment SPF Picture
quality
Density
21 Used to adjust the scanner exposure
level in all the scanner modes.
Adjustment Picture
quality
Density
22 Used to adjust the scanner exposure
level in the normal text mode.
Adjustment Picture
quality
Density
23 Used to adjust the scanner exposure
level in the fine text mode.
Adjustment Picture
quality
Density
24 Used to adjust the scanner exposure
level (in the super fine text mode).
Adjustment Picture
quality
Density
25 Used to adjust the scanner exposure
level in the ultra fine text mode.
Adjustment Picture
quality
Density
27 Used to adjust the gamma (density
gradient) of the network scanner
mode.
Adjustment Picture
quality
Code
Function (Purpose) Purpose Section Item
Main Sub
1