Basic entry programmes
Alternating between the
8-line
and
4-line
displays
For the SCHEDULE, TEL and MEMO modes, the size of the display can
be either 8 or 4 lines. The size of each entry will be remembered separately.
The 8-line mode displays 16 characters per line to allow more information
to be seen at one time, while the 4-line mode displays larger letters at 12
characters per line for easier viewing. You can also use
a
to create
spaces between the lines for easier reading. Only one size at a time can
be used for each entry.
Note: Some displays within the Organizer will employ both 4-line and
8-line components. However, you cannot enter data in both modes
simultaneously.
1.
First display the data in the MEMO mode.
2. Now select the 4-line display mode.
-1
4+8 LINES
[
1
3. Next, select the 8-line display mode.
-1
1
4+8
LINES
1
35
To Next Page
Loading...
