Sharp IQ-7000 - Setting the Standard Clock; Selecting a City for the HOME Time

Using the standard and world clocks
l When -1 is pressed, the world clock shows you the current
date and local time in any of the world cities you look up. This function
is referred to as “the world clock” in contrast to the standard clock.
The times appearing on the world clock are set to correspond with the
HOME time in the city set as the standard city.
Setting the standard clock
First, select the city whose HOME time you wish to use as the standard
time (presumably your own city), then set the current time.
)CAUTION: If the standard time for the built-in clock is set prior to setting)
the standard city, the time appearing on the display will be
the HOME time for the city that was previously set.
Selecting a city for the HOME time
To select local “NEW YORK” time as the HOME time, for example:
1. Recall the standard city setting display:
I
(The standard city and HOME time can be input.)
37