Using the standard and world clocks
3. Input the date.
/XJ
12121988
Input the day and month in 2 digits and the year in 4 digits. For single
I
digit months or days, input “0” before the single digit.
Note:
The Organizer is initially set to receive this input in the order of month,
day, and year. However, this order can be changed to day, month, and
year. (Refer to “Date Format,” page 149.)
4. Enter the correct starting time.
Notes:
l
Use the beep of the time announcements given on the radio, on T.V.,
or by telephone time services.
l
The clock starts from 0 seconds. (After the set time is displayed, the
previous display appears.)
5. Check the set time on the display.
When the time is set with 12-hour basis, noon and midnight changes
are displayed as below.
1159AM
+
12:OOPM
(noon)
+
1259PM
3
1 :OOPM
+
1159PM
+
12:OOAM
(midnight)
+
12:59AM
+
1 :OOAM
+
11:59AM
41
To Next Page
Loading...
Need help?
General
