89
Useful features (Analogue)
Time display
You can display the time information included in the
Teletext. Follow the steps below to display the time.
Select a TV channel providing Teletext
information.
(The time information is automatically
captured.)
1
2
3
4
Press p. The channel display will appear
on the Display.
Press p again within the three-second
interval the channel display is on the screen.
Time information will display on the lower left
of the screen for about three seconds.
Even when you change the TV channel, you
can display the time information with steps
2 – 3 above.
NOTE
• The time is not captured when a selected channel has no
Teletext information.
NOTE
• The time display cannot be stored once the power is
turned off. When you turn on the power, perform steps 1 –
4 again.
NOTE
• If receiving a digital broadcast, you can only display the
time by performing steps 2 and 3 below.
LC-30AD1E(E)-j 03.10.31, 1:33 PM89
To Next Page
Loading...
