Sharp MX-C300W User Manual

140
SCANNER FUNCTIONS
5
Connect the USB memory device to the machine.
6
Press the [COLOR START] key or
[BLACK & WHITE START] key.
Scanning begins.
If scanning is completed normally, "Complete." is
appears briefly and then the display returns to the
base screen.
6
Press the [COLOR START] key or
[BLACK & WHITE START] key.
Scanning begins.
7
If you have another page to scan,
change pages and then press [COLOR
START] key or [BLACK & WHITE
START] key.
• Repeat this sequence until all pages have been
scanned.
• If no action is taken for one minute (the
[START] key is not pressed), scanning
automatically ends and transmission begins.
8
When the final original page has been
scanned, press the [READ-END] key
().
Open the document feeder and remove the
document. When the original is removed or any
key operation is performed, the display returns to
the base screen.
If a USB memory device is inserted into the machine prior to step 4, the following screen will appear.
Instead of performing steps 3 and 4, you can select "Scan to the memory device" with the [ ] or [ ] key in the
above screen and press the [OK] key to select the USB memory device as the destination.
Note
Using the document feeder Using the document glass

Sharp MX-C300W Specifications

General

Print Technology	Laser
Print Speed (Black)	30 ppm
Print Speed (Color)	30 ppm
Print Resolution	600 x 600 dpi
Copy Speed (Black)	30 cpm
Copy Speed (Color)	30 cpm
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Fax Transmission Speed	33.6 Kbps
Duplex Printing	Yes
Mobile Printing	Yes
Max Paper Size	8.5" x 14"
Connectivity	USB, Ethernet, Wireless
Display	4.3-inch color touchscreen
Weight	29 kg
Scan Type	Flatbed, ADF