165
ROUTINE MAINTENANCE
3
To clean the removed rollers, wipe each roller with a clean cloth.
4
Close the document conveyor cover on the automatic document feeder.
5
Turn on the power.
CLEANING THE MAIN CHARGER OF THE
PHOTOCONDUCTIVE DRUM
If black lines or colored lines appear even after you have cleaned the document glass and automatic document
feeder, use the charger cleaner to clean the main charger.
1
Procedure of "REPLACING THE TONER COLLECTION CONTAINER" (p.161), release
the toner collection container.
2
Grasp the green knob to release the lock and gently remove the charger cleaner.
3
Gently push the charger cleaner all the way in.
4
Repeat step 2 and 3 with each of the other main chargers.
5
Procedure of "REPLACING THE TONER COLLECTION CONTAINER" (p.161), push the
toner collection container into the machine.
When cleaning the rollers, be careful not to injure your
hands.
Do not touch the surface of the roller if your hands are dirty.
Take care that your fingers are not pinched when closing the cover.
• If this does not solve the problem, pull the knob out and push it back in 2 more times.
• When pulling and pushing the knob to clean the charger, pull and push the knob slowly from one end to the
other.
• Touching the waste toner outlet or the toner collection container may soil your hands and clothes. Exercise
caution when cleaning the charger.
Warning
Note
Note
Note
To Next Page
Loading...
Need help?
General
