Name: Sharp MX-C300W
Brand: Sharp
Rating: 5 (1 reviews)

To Next Page

To Previous Page

PRINTER

PRINTING ON ENVELOPES

The bypass tray can be used to print on special media such as envelopes. The procedure for printing on an

envelope from the printer driver properties screen is described below.

For the types of paper that can be used in the bypass tray, see "PAPER" (P.16) in "BEFORE USING THE

MACHINE". For the procedure for loading paper in the bypass tray, see "Loading the bypass tray" (P.20) in

"BEFORE USING THE MACHINE".

Select the envelope size in the appropriate settings of the application ("Page Settings" in many applications) and

then perform the following steps.

(1) Click the [Paper] tab.

(2) Select the envelope size from the "Paper Size"

menu.

The paper tray and paper type are automatically

selected.

(2)(1)

• It is recommended that you do a test print to check the print result before using an envelope.

• In the case of media that can only be loaded in a certain orientation such as an envelope, you can rotate the

image 180 degrees if needed. For more information, see "ROTATING THE PRINT IMAGE 180 DEGREES

(Rotate 180 degrees)".

• When feeding an envelope, push down the fusing unit release levers (see p.10) to release the pressure.

Note

Other manuals for Sharp MX-C300W

Questions and Answers:

Need help?

Do you have a question about the Sharp MX-C300W and is the answer not in the manual?

General