Name: Sharp MX-C300W
Brand: Sharp
Rating: 5 (1 reviews)

To Next Page

To Previous Page

COPY FUNCTIONS

SELECTING THE ORIGINAL SIZE

When you want to change the original size, select "Original Size" on the right menu and press the [OK] key.

Select Inch or AB with the [ ][ ] keys, and select the size with the [ ][ ] keys.

Press the [OK] key. You will return to the base copy screen.

USING THE BYPASS TRAY TO COPY A SPECIAL SIZE

ORIGINAL

Select "Original Size" in the right menu of the base screen of copy mode and press the [OK] key.

Select "Size Input" in the original size selection screen and press the [OK] key to display the size entry (inch)

screen.

Select "X" (width) with the [ ] or [ ] key and enter the width with the [ ] or [ ] key, then do the same for the

length (Y), and press the [OK] key.

REDUCING OR ENLARGING A COPY

Place the original, and press the [ZOOM] key on the operation panel to change to the ratio selection screen.

Specifying a ratio from 25% to 400%: Preset ratios/zoom.

(When the document feeder is being used, the zoom copy ratio range is 25% to 200%.)

Select the ratio with the [ ][ ] keys. You can fine adjust with the [ ][ ] keys (increments of 1%).

Press the [OK] key to enter the ratio.

Other manuals for Sharp MX-C300W

Questions and Answers:

Need help?

Do you have a question about the Sharp MX-C300W and is the answer not in the manual?

General