196
WEB FUNCTIONS IN THE MACHINE
Storing destinations for Scan to FTP
Click [FTP], and enter the destination information.
For the settings, see the following table.
FTP destination information
* If you entered a host name in "Hostname or IP Address", you will need to enter the DNS server settings. (p.203)
Item Description
Name (Required) Enter the name of the destination (up to 36 characters).
Initial (Optional) Enter initial text for the destination (maximum of 10 characters). When the destination
list is displayed in the destination control screen, the initial text is used to group the
destinations.
Custom Index Names can be assigned to the custom indexes as desired (p.191), allowing
convenient grouping of destinations.
Drop down list: Select a custom index for the destination to be stored.
User checkbox: When this is selected, the destination is stored in the user tab of
the address book. (p.128)
Hostname or IP Address
(required)*
Enter the IP address or host name of the FTP server (maximum of 127 characters).
User Name (Optional) Enter the login user name for the FTP server (maximum of 32 characters).
Password (Optional) Enter the login password for the FTP server (maximum of 32 characters).
Directory (Optional) If you wish to specify a destination directory on the FTP server, enter the directory
(maximum of 200 characters).
To Next Page
Loading...
Need help?
General
