Sharp MX-M264N User Manual

3-74
PRINTER
Contents
PRINTER SPECIFICATIONS
*1 When the PS3 expansion kit is installed and the machine is used as a PostScript printer.
*2 Barcode font kit is required.
Type Built-in
Continuous printing speed
MX-M264N: 26 pages/min
MX-M314N: 31 pages/min
MX-M354N: 35 pages/min
(When printing same document continuously on 8-1/2"x11" (A4) plain paper in non-offset mode,
excluding processing time.)
Printing resolution 600x600 dpi, 1200x600 dpi
Printer driver type PCL6, PostScript 3 compatible*
1
Supported protocols TCP/IP, IPX/SPX, NetBEUI, EtherTalk*
1
Supported client PC
operating systems
See "VERIFYING SYSTEM REQUIREMENTS" in the Software Setup Guide.
Fonts
PCL6 80 European fonts, 28 barcode fonts*
2
, 1 bitmap font
PostScript 3 compatible*
1
136 European fonts
Interface port
LAN connectivity: 10Base-T / 100Base-TX / 1000Base-T
USB connectivity: Supports USB 2.0 (Hi speed)
Memory Standard system memory: 2GB
Print area
Entire page excluding margin of 11/64" (4.2mm) at each edge. The actual print area may vary
depending on the printer driver and the software application.

Sharp MX-M264N Specifications

General

Print Technology	Laser
Functions	Print, Copy, Scan, Fax
Print Speed	26 ppm
Max Print Resolution	600 x 600 dpi
Standard Paper Capacity	1100 sheets
Max Paper Capacity	2100 sheets
Automatic Duplexing	Yes
ADF Capacity	100 sheets
Scan Resolution	600 x 600 dpi
Copy Speed	26 cpm
Copy Resolution	600 x 600 dpi
Connectivity	Ethernet, USB