Sharp MX-M264N

8-9
TROUBLESHOOTING
Contents
PAPER MISFEED ILLUSTRATIONS
If you require more information when reading the instructions in the touch panel, see the paper misfeed illustrations
below. Refer to the illustration below and then go to the appropriate illustration (1 to 7) for your situation.
☞ (1)-(3): page 8-9, (4)-(10): page 8-11
(1) Original misfeed
Open the document feeder
cover and remove the misfed
originals.
Pull out the document feeder
tray and remove the misfed
paper.
Open the automatic
document feeder. Rotate the
transfer roller in the direction
of the arrow and remove the
original.
(2) Paper misfeed in the output area
Pull the misfed paper out to
the output tray to remove it.
(3) Paper misfeed in the fusing unit
Open the bypass tray, and
then grasp the handle on the
side cover and pull out the
side cover.
Gently open the front cover.
Rotate the roller knob.
(1) (2) (7)
(6)
(3) (4)
(5)