TRANSMITTING ORIGINALS OF DIFFERENT
SIZES (Mixed Size Original)
This feature lets you scan and transmit originals of different sizes at the same time; for example, 8-1/2" x 14" (B4) size
originals mixed together with 11" x 17" (A3) size originals. When scanning the originals, the machine automatically
detects the size of each original.
For mixed size originals with different internal widths, you can only use the following combinations of original sizes.
• 11" x 17" and 8-1/2" x 14" • 11" x 17" and 8-1/2" x 13" • 11" x 17" and 5-1/2" x 8-1/2"
• A3 and B4 • A3 and B5 • B4 and A4 • A4 and B5
• A4R and B5 • B4 and A4R • B4 and A5 • B5 and A5
1
Insert the originals face up in the
document feeder tray.
Insert the originals with the corners aligned together in the far
left corner of the document feeder tray.
2
Enter the destination fax number.
☞
ENTERING DESTINATIONS (page 4-16)
3
Select the mixed size original setting.
(1) Touch the [Special Modes] key.
☞ SPECIAL MODES (page 4-71)
(2) Touch the [Mixed Size Original] key so that
it is highlighted.
(3) Touch the [OK] key.
If an original scan size has been specified, a message will appear when the [Mixed Size Original] key is touched. To
enable the Mixed Size Original setting, change the scan size setting to auto and then touch the [Mixed Size Original]
key again.
To Next Page
Loading...
Need help?
General
