Sharp MX-M264N User Manual

7-60
SYSTEM SETTINGS
Contents
When multiple users are selected
Card Area Settings
The data check during card reading can be set.
Settings
Card Type/Reader Settings
The authentication of Felica, HID and other IC cards can be set.
When multiple users are selected
Card Setting
(when the HID card reader is available.)
Configure this setting if user authentication will be performed using an HID card.
Card Reader Device Registration
In this setting, the product ID and vender ID of the connected HID card reader are displayed. To store the HID card
reader, touch the [Read] key.
* For settings that enable an HID card to be used, consult your service technician.
Item Description
Show Counts The counts and the number of pages remaining of the selected users are shown by function.
Clear Count Reset the count of the selected item to "0".
Clear All Count Reset all items of the selected users to "0".
Item Description
Check Facility Code in HID
Mode
Checks the facility code of the HID card.
Facility Code Enter the facility code of a HID card. When you tap the [Store] key, the facility code is stored.
Import from Configuration file Enter the configuration file name and tap the [Execute] key, and the card area settings will be
read from the configuration file.
Card reading test When you tap the [Execute] key, the card reader test starts and the test result is displayed.
Item Description
Use IC Card for Authentication The authentication of Felica, HID and other IC cards can be set.

Sharp MX-M264N Specifications

General

Print Technology	Laser
Functions	Print, Copy, Scan, Fax
Print Speed	26 ppm
Max Print Resolution	600 x 600 dpi
Standard Paper Capacity	1100 sheets
Max Paper Capacity	2100 sheets
Automatic Duplexing	Yes
ADF Capacity	100 sheets
Scan Resolution	600 x 600 dpi
Copy Speed	26 cpm
Copy Resolution	600 x 600 dpi
Connectivity	Ethernet, USB