Gently pull out the tray and
remove the misfed paper.
Gently insert the tray.
Close the side cover.
(6) Paper misfeed in the transport area
Open the paper tray right
side cover.
Remove the misfed paper.
Close the paper tray right
side cover.
Close the front cover and the
side cover.
(7) Paper misfeed in the finisher
(When the finisher (MX-FN23) is
installed)
Open the front cover.
While pressing the lever over
to the left, slide the finisher to
the left until it stops.
Turn roller rotating knob in
the direction of the arrow to
remove the misfed paper.
Return the finisher to the
right side.
Close the cover.
To Next Page
Loading...
