OPERATION PANEL
(1) Touch panel
Messages and keys appear in the touch panel display.
Touch the displayed keys to perform a variety of 
operations. The [HOME] ( ), [JOB STATUS] ( ), and 
[SYSTEM SETTINGS] ( ) keys are also available here.
When a key is touched, a beep sounds and the selected 
item is highlighted. This provides confirmation as you 
perform an operation.
+ TOUCH PANEL (page 1-10)
(2) [HOME] key ( )
Touch this key to display the home screen. Frequently 
used settings can be registered in the home screen to 
enable quick and easy operation of the machine.
+ HOME SCREEN (page 1-22)
(3) [JOB STATUS] key ( )
Touch this key to display the job status screen. The job 
status screen is used to check information on jobs and to 
cancel jobs.
For details, see the chapters for each of the functions in 
this manual.
(4) PRINT mode indicators ( )
• READY indicator
Print jobs can be received when this indicator is lit.
• DATA indicator
This blinks while print data is being received and lights 
steadily while printing is taking place.
(5) Numeric keys
These are used to enter the number of copies, fax 
numbers, and other numerical values. These keys are 
also used to enter numeric value settings (except for the 
system settings).
(6) [CLEAR] key ( )
Press this key to return the number of copies to "0".
(7) [SYSTEM SETTINGS] key ( )
Touch this key to display the system settings menu 
screen. The system settings are used to configure paper 
tray settings, store addresses for transmission 
operations, and adjust parameters to make the machine 
easier to use.
(8) IMAGE SEND mode indicators ( )
• LINE indicator
This lights up during transmission or reception of a fax 
or Internet fax. This also lights during transmission of 
an image in scan mode.
• DATA indicator
This blinks when a received fax or Internet fax cannot 
be printed because of a problem such as out of paper. 
This lights up when there is a transmission job that has 
not been sent.
(9) Stylus pen
This can be used to touch a key displayed on the touch 
panel.