Sharp MX-M464N User Manual

3-50
PRINTER
Contents
PRINTING A CARBON COPY (Carbon Copy)
(This function is only available in Windows.)
This function is used to print an additional copy of the
print image on paper that is the same size but from a
different paper tray.
For example, if carbon copy print is selected when
standard paper is loaded in tray 1 and colored paper is
loaded in tray 2, a print result similar to a carbon copy
slip can be obtained with a single selection of the print
command. As another example, if standard paper is
loaded in tray 1 and recycled paper is loaded in tray 2,
Carbon Copy can simultaneously print one copy for
presentation and one copy as a duplicate.
(1) Click the [Special Modes] tab.
(2) Select [Carbon Copy] and click the
[Settings] button.
(3) Select the carbon copy settings.
Select the tray for the "Top Copy" and then select the tray
for the carbon copy (or copies) in "Carbon Copy".
A
A
A
A
Windows
()
(2)
(3)
When the bypass tray is selected, be sure to select
the "Paper Type".

Sharp MX-M464N Specifications

General

Print Technology	Laser
Print Speed	46 ppm
Maximum Print Resolution	1200 x 1200 dpi
Duplex Printing	Yes
Copy Speed	46 cpm
Hard Disk Drive	320 GB
Functions	Print, Copy, Scan, Fax
Print Resolution	1200 x 1200 dpi
Scan Resolution	600 x 600 dpi
Warm-up Time	20 seconds
Max Paper Size	A3
Scanner Type	Color Flatbed
Paper Size	A3, A4, A5, B4, B5
Connectivity	USB, Ethernet
Original Size	A3
Operating System Compatibility	Windows, Mac, Linux
Standard Paper Capacity	1100 sheets