Sharp MX-M464N User Manual

2-44
COPIER
Contents
ADDING MARGINS (Margin Shift)
This function is used to shift the copy image right, left or down to adjust the margin.
This is convenient when you wish to bind the copies with a string or in a binder.
Shifting the image to the right so the copies can be bound at the left edge with a string
Margin shift positions
1
1
Not using margin shift Using margin shift
The punch holes cut off
part of the image
The image is moved to
allow space for the string
holes so the image is not
cut off.
1
1
1
Place the original.
Place the original face up in the document feeder tray, or face down on the document glass.
2
Select the special modes.
(1) Touch the [Special Modes] key.
(2) Touch the [Margin Shift] key.
+ Special modes menu (1st screen) (page 2-41)
3
Set the margin shift.
(1) Touch the margin shift position.
Select one of the three positions.
(2) Set the amount of the margin shift with
.
0" to 1" (0 mm to 20 mm) can be entered.
(3) Touch the [OK] key.
You will return to the base screen of copy mode.
Left
edge
Right
edge
Top edge
Special Modes
OK
1/2
Margin Shift
Right Left Down Side 1
(0~1)
inch
1/2
Side 2
(0~1)
inch
OKCancel
(1) (2) (3)

Sharp MX-M464N Specifications

General

Print Technology	Laser
Print Speed	46 ppm
Maximum Print Resolution	1200 x 1200 dpi
Duplex Printing	Yes
Copy Speed	46 cpm
Hard Disk Drive	320 GB
Functions	Print, Copy, Scan, Fax
Print Resolution	1200 x 1200 dpi
Scan Resolution	600 x 600 dpi
Warm-up Time	20 seconds
Max Paper Size	A3
Scanner Type	Color Flatbed
Paper Size	A3, A4, A5, B4, B5
Connectivity	USB, Ethernet
Original Size	A3
Operating System Compatibility	Windows, Mac, Linux
Standard Paper Capacity	1100 sheets