Sharp MX-M464N User Manual

2-23
COPIER
Contents
REDUCTION/ENLARGEMENT/ZOOM
AUTOMATIC RATIO SELECTION (Auto Image)
This section explains the automatic ratio selection function (Auto Image), which automatically selects the ratio to match
the paper size.
When the paper tray is manually changed, the [Auto Image] key appears in the base screen of copy mode. Touch the
[Auto Image] key to have the reduction or enlargement ratio automatically selected based on the original size and the
selected paper size.
First place the original and select the paper tray, and then touch the [Auto Image] key.
• If the message "Rotate original from to " is displayed, change the orientation of the original as indicated in the
message.
• For a non-standard size original, the size must be entered in order to use Auto Image.
• To cancel automatic ratio selection...
Touch the [Auto Image] key so that it is no longer highlighted.
• To return the ratio to 100%...
To return the ratio setting to 100%, touch the [Copy Ratio] key to display the ratio menu and then touch the [100%] key.
System Settings (Administrator): Initial Status Settings (Copy Ratio)
This is used to change the default copy ratio.
Auto
8½x11
Plain
8½x11
Color Mode
Special Modes
2-Sided Copy
Output
File
Quick File
Copy Ratio
100%
Original
Paper Select
Auto
Full Color
Exposure
Auto
Auto Image
Preview
Plain
3.
1.
2.
4.
8½x11
11x17
8½x11R
8½x14
8½x11
The selected ratio will appear in the ratio display.

Sharp MX-M464N Specifications

General

Print Technology	Laser
Print Speed	46 ppm
Maximum Print Resolution	1200 x 1200 dpi
Duplex Printing	Yes
Copy Speed	46 cpm
Hard Disk Drive	320 GB
Functions	Print, Copy, Scan, Fax
Print Resolution	1200 x 1200 dpi
Scan Resolution	600 x 600 dpi
Warm-up Time	20 seconds
Max Paper Size	A3
Scanner Type	Color Flatbed
Paper Size	A3, A4, A5, B4, B5
Connectivity	USB, Ethernet
Original Size	A3
Operating System Compatibility	Windows, Mac, Linux
Standard Paper Capacity	1100 sheets