Sharp MX-M464N - Replacing the Toner Collection Container

1-77
BEFORE USING THE MACHINE
Contents
REPLACING THE TONER COLLECTION
CONTAINER
The toner collection container collects excess toner that is produced during printing. When the toner collection container
becomes full, "Replace used toner container." will appear.
1
Open the front cover.
2
Release the used toner collection
container.
Press up the toner collection container release lever.
The toner collection container will fall forward as shown below.
Wait until the container comes to a stop.
3
Remove the toner collection container.
Hold the toner collection container by both hands and lift it up
slowly.
4
Place the toner collection container on a
flat surface.
Place a sheet of paper such as newspaper on the surface
before placing the toner collection container.
Do not discard the removed toner collection container. Store it in a plastic bag. The person in charge shall collect it for
maintenance.