Sharp MX-M464N User Manual

1-48
BEFORE USING THE MACHINE
Contents
FINISHER MAINTENANCE
When the staple cartridge runs out of staples, a message will appear in the operation panel. Follow the procedure below
to replace the staple cartridge.
Replacing the staple cartridge
1
Open the cover.
2
While pressing the lever over to the left,
slide the finisher to the left until it stops.
Gently slide the finisher until it stops.
3
Lower the staple case release lever and
remove the staple case.
Pull the staple case out to the right.
4
Remove the empty staple cartridge from
the staple case.
5
Insert a new staple cartridge into the
staple case as shown.
Push the staple cartridge in until it clicks into place.

Sharp MX-M464N Specifications

General

Print Technology	Laser
Print Speed	46 ppm
Maximum Print Resolution	1200 x 1200 dpi
Duplex Printing	Yes
Copy Speed	46 cpm
Hard Disk Drive	320 GB
Functions	Print, Copy, Scan, Fax
Print Resolution	1200 x 1200 dpi
Scan Resolution	600 x 600 dpi
Warm-up Time	20 seconds
Max Paper Size	A3
Scanner Type	Color Flatbed
Paper Size	A3, A4, A5, B4, B5
Connectivity	USB, Ethernet
Original Size	A3
Operating System Compatibility	Windows, Mac, Linux
Standard Paper Capacity	1100 sheets