RETRIEVING A DESTINATION FROM A
GLOBAL ADDRESS BOOK
When an LDAP server is configured in the Web pages, you can look up an address in a global address book and
retrieve the address for Scan to E-mail or Internet fax transmission (excluding Direct SMTP addresses).
1
Open the global address search screen.
(1) Touch the [Address Book] key in the base
screen.
(2) Touch the [Global Address Search] key.
2
Search for the destination.
If only one LDAP server has been stored, (1) and (2) are not
necessary. Go directly to (3). If an authentication screen for the
LDAP server appears, enter your user name and password.
(1) Touch the key of the LDAP server that you
wish to use.
If an authentication screen for the LDAP server appears,
enter your user name and password.
(2) Touch the [OK] key.
(3) Search for the destination in the search
screen.
Enter search characters for the destination and touch the
[Search] key. The search results will appear after a brief
interval.
For the procedure for entering text, see "ENTERING
TEXT" (page 1-80) in "1. BEFORE USING THE
MACHINE".
How to search
Enter the search characters (maximum of 64 characters). The system will look for names starting with the entered
letters.
An asterisk can be used as follows:
XXX : Names beginning with "XXX".
XXX: Names that end with "XXX".
XXX : Names that include "XXX".
AA XX: Names that start with "AA" and end with "XX".
To Next Page
Loading...
Need help?
General
