Sharp MX-M464N - Copying Thin Originals; Mode)

2-128
COPIER
Contents
COPYING THIN ORIGINALS (Slow Scan
Mode)
Use this function when you wish to scan thin originals using the automatic document feeder. This function helps prevent
thin originals from misfeeding.
1
Insert the originals face up in the
document feeder tray.
Insert the originals all the way into the document feeder tray.
Multiple originals can be placed in the document feeder tray.
The stack of originals must not be higher than the indicator line
on the tray.
If the originals are inserted with too much force, they may crumple and misfeed.
2
Select Slow Scan Mode.
(1) Touch the [Special Modes] key.
+ SPECIAL MODES (page 2-41)
(2) Touch the keys to switch through the
screens.
(3) Touch the [Slow Scan Mode] key so that it is
highlighted.
(4) Touch the [OK] key.
You will return to the base screen of copy mode.
3
Press the [START] key.
Copying will begin.
To cancel scanning and copying...
Press the [STOP] key ( ).
D
C
B
A
D
C
B
A
Indicator line
(4)(2)(3)