Sharp MX-M464N User Manual

8-13
TROUBLESHOOTING
Contents
SADDLE STITCH FINISHER
Finisher unit
1
Open the front cover.
2
While pulling the lever, slide the saddle
stitch finisher to the left until it stops.
3
Lower the staple case release lever and
remove the staple case.
Pull the staple case out to the right.
4
Raise the lever at the front end of the
staple case and remove the jammed
staple.
Remove the leading staple if it is bent. If bent staples remain, a
staple jam will occur again.
Take care that a bent staple does not hurt you.
5
Lower the lever at the front end of the
staple case.

Sharp MX-M464N Specifications

General

Print Technology	Laser
Print Speed	46 ppm
Maximum Print Resolution	1200 x 1200 dpi
Duplex Printing	Yes
Copy Speed	46 cpm
Hard Disk Drive	320 GB
Functions	Print, Copy, Scan, Fax
Print Resolution	1200 x 1200 dpi
Scan Resolution	600 x 600 dpi
Warm-up Time	20 seconds
Max Paper Size	A3
Scanner Type	Color Flatbed
Paper Size	A3, A4, A5, B4, B5
Connectivity	USB, Ethernet
Original Size	A3
Operating System Compatibility	Windows, Mac, Linux
Standard Paper Capacity	1100 sheets