Sharp MX-M464N - Giving Priority to a Scan Transmission Job

5-110
SCANNER/INTERNET FAX
Contents
GIVING PRIORITY TO A SCAN
TRANSMISSION JOB
When multiple jobs are waiting to be transmitted, the jobs are normally transmitted in the order they were reserved. If
you need to give priority to a job and send it ahead of the other jobs, follow the steps below.
1
Touch the [JOB STATUS] key ( ).
2
Select the job to which you wish to give
priority.
(1) Touch the mode tab of the job to be given
priority.
(2) Touch the key of the job to be given priority.
(3) Touch the [Priority] key.
The selected job moves up to the position immediately
following the job in progress. The job will be executed
when the job in progress is completed.
Broadcast
1
2
4
10:00 04/01 020/003 Connecting
AAA AAA
CCC CCC
10:05 04/01 000/001
Waiting
10:30 04/01 000/010
Waiting
Priority
3
BBB BBB
10:22 04/01 000/004
Waiting
Print Job
Fax Job
Internet Fax
Scan to
Address Set Time
Pages
Status
1
1
Complete
Detail
Stop/Delete
Job Queue
(2) (3)
(1) (1)