(2) Alarm message
When any trouble occurs which makes it unable to start or continue
copying, one of the following messages is displayed. When the
trouble is cancelled, the message is cleared and the machine is
automatically reset.
1
Alarm message
Troubles which can be
processed by general users
Troubles which reguire the key
operator judgment
Troubles which reguire service
maintenance
Others
2
3
4
Toner empty
Stapler needle empty
Waste toner bottle full
Door/cover open
1
Standby/copying
5
6
7
8
Stapler jam
Duplex copy tray trouble
Original feeder trouble
Sorter unit trouble
9 Supply part replacement
reguired
12
13
During communication
During process control
10
11
Maintenance reguired
During diagnostic operation
Copy possible
Copying is stopped
Toner density low is sensed in the developer "Copy possible (Supply toner)"
"During copying (Supply toner)"
After toner density falls in the developer a
specifiled number of copies are made
"Supply toner"
Toner supply
9 – 3
To Next Page
Loading...
