3-8
IRAffinity-1
Chapter 3 Installation
5. [Selection of Video capture device] dialog box is displayed.
Fig. 3.4 [Selection of Video capture device] Dialog Box
6. Select the video capture device for to use Infrared microscope. If the microscope is already
used by former version of IRsolution with installing ViewCast Osprey-100 video capture board
on the PC, select the radio button "ViewCast Osprey-100". If the microscope is not used or
another kind of video capture device is used, select the radio button "Normal video capture
device". Click [Next] button after this selection.
7. Installation starts, Installation procedure is displayed on the [Setup Status] dialog box.
8. The [Please give in CD key for this product] window opens.
Fig. 3.5 [Please give in CD key for this product] Dialog Box
9. Input the CD Key written on the CD-ROM package into the [Serial Number CD Key]. If the
input CD Key is not correct, you cannot proceed to the next step. After inputting the
information, click the [OK] button.
To Next Page
Loading...
Need help?
General
