2 Specification
2-5
• Analysis functions > Number of analyses 21 maximum
> Measurement sequence 3 maximum
> Cancel of analysis results
> Immediate calculation
(Average value calculation before the end
of multi-time analysis)
> Recycle calculation
> Supplementary analysis
> Abnormal burn monitoring
> Frequency distribution and pulse-intensity
profile data
• Process control > Standard control
> R-control
• Analysis result output settings > Display and print-out orders
> Number of digits
> Display and print-out items (Ave./R/SD/CV)
> Display and print-out layouts and fonts
• Result transmission > Serial single-host transmission
> Serial multi-host transmission (option)
5 hosts maximum
> Serial multi-printer transmission (option)
5 printers maximum
> LAN (Ethernet) transmission
• Result storage settings > Items below can be stored
- Each time analysis result and Average
- Intensity value
- Round analysis result
> Number of results stored
Depends only on the HDD capacity
• Alloy identification > Number of standards groups
Depends only on the HDD capacity
> Number standards
1000 maximum / group
To Next Page
Loading...
Need help?
General
