Shimadzu PDA-7000 - 6.5 Power supply

5 Maintenance
5-3
(3) Work required after maintenance service
Work
Reference
Waste discharge
5.10 Waste discharge
Recalibration
4.8 Recalibration
Master curve correction (only when necessary)
4.9 Master curve correction
Check analysis using the Sample for checking
4.10 Check analysis
(4) Maintenance service by Shimadzu service engineer
Maintenance Item
Cycle
Reference
Periodic inspection
on the instrument
Annually
5.14 Periodic inspection
Temperature control
fan heater
Annually
5.15 Cleaning the temperature
control fan heater