SICK CLV61 Series User Manual

3.2.3 Product features and functions (overview)
Table 6: Overview of product features and functions of the device
Product feature/func‐
tion
Characteristic
Safety and ease of
use
•
Rugged, compact IP65 metal housing, CE marking (Europe)
•
Laser Class 2, laser switches off if the output power is exceeded
•
Automatic self-test on system start
•
Diagnostic tools for system setup and (remote) system monitoring
•
Configurable output of reading diagnostic data in two reading
results formats
•
Operating data polling, in case of error, issue of error code if
required
•
Activatable test string function (heartbeat) to signal that the device
is ready for operation
•
Password-protected configuration mode via SOPAS ET
•
Future-proof due to firmware update via data interface
•
Future-oriented SOPAS ET configuration software
•
Low power consumption
•
Additional supply voltage range
•
Optional parameter cloning using an external CMC600 parameter
cloning module in the CDB/CDM connection module
Convenient operation
and configuration
•
Configuration via SOPAS ET configuration software (online/offline)
or commands
•
Type-dependent configuration via GSD parameterization and via
CDF600-2xx for CLV61x-Fxxxx
•
LED status indicator
•
Deactivatable acoustic signaling device for confirming device func‐
tioning
Reading Operation
Mode
•
Start/stop operation (one bar-code bearing object per reading inter‐
val)
Read cycle
•
Pulse sources for start: Digital inputs, data interface (command),
auto pulse, free-running, CAN
•
Pulse sources for stop: Read cycle source, digital inputs, data inter‐
face (command), timer, condition
Bar code evaluation
•
All current 1D bar code types
•
Max. number of bar codes: 50 per reading interval
•
Separation of identical codes of the same code type using the read
angle
Data processing
•
Output of read data configurable through event-dependent evalua‐
tion conditions
•
Influencing the output string by filtering and output sorting
Data communication
•
Host interface: Two data output formats can be configured for the
reading result, can be switched to various physical interfaces, paral‐
lel operation possible
•
AUX interface: Fixed data output format that can be switched for
various physical interfaces
3.2.4 Operating principle
The device consists of a laser scanner (laser diode and optics), an electronics unit with
integrated decoder and various data interfaces (type-dependent) to industrial bus sys‐
tems. The use of various focusing settings, resolutions, scan processes, bus systems,
mounting options and optics enables use in most industrial applications. Interfaces to
external timers, such as photoelectric sensors or incremental encoders, enable reading
pulses independent of the control. The device makes the read results available for
further processing via its data interfaces.
3 PRODUCT DESCRIPTION
20
O P E R A T I N G I N S T R U C T I O N S | CLV61x 8017840/19OF/2021-10-28 | SICK
Subject to change without notice

SICK CLV61 Series Specifications

General

Brand	SICK
Model	CLV61 Series
Category	Barcode Reader
Language	English