47. System connection (male connector, M12, 5-pin)................................................... 80
48. System connection (male connector M12, 8-pin).................................................... 80
49. Extension connection (female connector M12, 5-pin).............................................82
50. SP1 system plug with 2 DIP switches........................................................................85
51. SP2 system plug with 14 DIP switches..................................................................... 85
52. Reset to factory settings............................................................................................ 87
53. Configuring beam coding........................................................................................... 88
54. DIP switch for muting on the SP2 system plug......................................................... 90
55. DIP switches for scanning ranges on SP2 system plug............................................92
56. DIP switch for reduced resolution on SP2 system plug............................................93
57. DIP switch for smart presence detection on SP2 system plug................................94
58. DIP switch for parity on SP2 system plug..................................................................95
59. QuickFix bracket: adjust vertically...........................................................................105
60. FlexFix bracket: adjust vertically/rotate..................................................................106
61. Dimensional drawing of sender and receiver.........................................................135
62. Dimensional drawing of the QuickFix bracket........................................................ 139
63. Dimensional drawing of the FlexFix bracket........................................................... 140
64. Internal circuitry: T-connector with pushbutton for laser alignment aid (5-pin)...142
65. Internal circuitry: pushbutton for laser alignment aid (5-pin)............................... 143
66. Internal circuitry: pushbutton for laser alignment aid (8-pin)............................... 144
67. Example of use of deflector mirrors........................................................................144
68. Recommended distance when using deflector mirrors.........................................145
LIST OF FIGURES 17
8023872/18YZ/2021-01-14 | SICK O P E R A T I N G I N S T R U C T I O N S | deTec4 Ex II 3GD
153
Subject to change without notice
To Next Page
Loading...
