2b) ACCU-1-L
Number of the 1st data field word,
possible values (depending on the
address area type:
DB, DX: 0 to 2038
F flags: 0 to 246
(= No. of flag byte ’x ’)
S flags 0 to 4086
(= No. of flag byte ’x ’)
Result
After correctly processing OB 182: RLO, condition code bits OR,
ERAB and OS = 0.
Possible errors
If an error occurs, an error ID is entered in ACCU 1 (see table below).
ACCU-1-L Meaning
B601H
B60FH
B611H
B612H
B613H
B621H
B622H
B623H
B624H
B625H
B626H
B627H
B628H
B629H
B62AH
B62BH
B62CH
Data block not loaded
Multiple block call
Incorrect content in the data field
Address area type illegal
Data block no. illegal
"Number of the 1st data field word" illegal
"Source data block type" illegal
"Source data block no." illegal
"No. of the 1st data word to be transmitted in source
DB" illegal
Length of the source data block in the block header
< 5 words
"Destination data block type" illegal
"Destination data block no." illegal
"No. of 1st data word to written in destination
DB" illegal
Length of the destination block in block header < 5
words
"Number of data words to be transmitted" illegal
(= 0 or > 4091)
Source data block too short
Destination data block too short
Table 6-18 Error IDs of OB 182 in ACCU-1-L
OB 182: Copy Data Area
CPU 948 Programming Guide
C79000-G8576-C848-04
6 - 61
To Next Page
Loading...
Need help?
General
