62/116
Smart Infrastructure Basic Documentation LME7... CC1P7105en
12 Safety notes relating to operation of AZL2 24.07.2020
12 Safety notes relating to operation of
AZL2
Caution!
The following information must be observed to prevent the risk of fire or
explosion, damage to the heating plant or damage resulting from improper
usage:
The LME7 described in this basic documentation may only be used as specified and
only in connection with the appropriate burner and heating plant. Failure to observe
this information poses a risk of the safety functions being impaired.
The LME7 with AZL2 and the heating control may only be installed and
commissioned by authorized personnel. Failure to observe this information poses a
risk of loss of safety functions and a risk of electric shock.
The AZL2 is designed for use in dry rooms only. Do not install the AZL2 outdoors and
protect it from heat, frost and liquids, such as water, oil, and fuel oil. Failure to
observe this information poses a risk of electric shock.
The operating steps and settings instructions detailed in this basic documentation
must be observed precisely. Certain settings may only be made by authorized
personnel and these are clearly identified as such. Failure to observe this information
poses a risk of the safety functions being impaired.
Only clean the AZL2 with a dry cloth when dirty or dusty.
Do not perform any maintenance or repair work on the AZL2 yourself. This type of
work may only be performed by authorized personnel. Failure to observe this
information poses a risk of electric shock.
If you have any other questions relating to the AZL2, please contact your heating
engineer at any of the addresses provided in this basic documentation.
To Next Page
Loading...
